Osmio Zero sanitising kit

Osmio Zero sanitising kit

€30,00

Rated 0 out of 5
0

Sanitising Osmio Zero when replacing its filters is recommended to help prevent bacterial growth.

 

 

The sanitising kit contains two empty quick-change cartridges, one empty remineralisation cartridge and four Milton sterilising tablets.

Sanitise the system every six months before fitting new filters.

How to sanitise Osmio Zero

  1. Open the water-tank lid and leave it open. Remove the tank, then drain all filtered water from the machine.
  2. Carefully remove all four filters: the tank’s sediment filter, carbon filter, reverse osmosis membrane and remineralisation filter.
  3. Fit the three empty cartridges from the sanitising kit. The kit does not include a sediment-filter replacement.
  4. Fill the tank with 2.5 litres of water — no more. Refit it, add two Milton tablets and leave the lid open. Wait five minutes for the tablets to dissolve.
  5. If the machine requests a water change while more than 2 cm remains in the tank, open and close the lid until the level drops to about 2 cm. Dispense 250 ml, then close the lid and wait for filtration to finish.
  6. Leave the sanitising solution to work for 15–30 minutes.
  7. Open the tank lid and drain all sanitising solution from the machine.
  8. Open the tank lid and drain all sanitising solution from the machine.
  9. Remove and thoroughly rinse the tank. Fit a new sediment filter, leaving the other empty sanitising cartridges in place. Fill the tank with 2.5 litres of water and run it through the system. Repeat four times: 4 × 2.5 litres in total.
  10. Remove all three empty sanitising cartridges and fit the new replacement filters.
  11. Prepare the new filters as you did when first setting up the system. Flushing with two full tanks of water is recommended.
Sanitising video: